DMD660 - OPERATING MANUAL // PAGE 9
CAUTION
Risk of minor or moderate injury through unexpected movement
Exceeding the static or dynamic load limits of the DMD660 may cause unexpected op-
eration. This may lead to minor or moderate injury.
• See page 6 and read the product's Datasheet to determine the relevant load limits
• Do not exceed load limits
2.8 SKILLED PERSONS
CAUTION Risk of injury through incorrect assembly
Only Skilled Persons have the expertise to complete the assembly process safely.
Assembly by Unskilled Persons may lead to minor or moderate injury.
• Ensure that only Skilled Persons are allowed to complete assembly
• Ensure that persons with limited ability to react to danger do not take part in the
assembly process
The DMD660 may only be assembled by Skilled Persons. A Skilled Person is defined as someone who:
• Is authorized for installation planning, installation, commissioning, or servicing of the product
• Has read and understood all documentation relevant to the DM System and its component products
• Has the technical education, training, and/or experience to perceive risks and avoid hazards
• Has knowledge of the specialist standards applicable to the product
• Has the expertise to test, assess, and manage electrical and mechatronic products and systems in
accordance with the generally accepted standards and guidelines of electrical engineering and
furniture manufacturing
2.9 NOTES FOR RESELLERS
Resellers are companies that purchase LOGICDATA products for installation in their own products.
INFO
For reasons of EU conformity and product safety, Resellers should provide end users
with an Operating Manual in their native EU official language.
INFO
Operating Manuals must include all the safety instructions that end users require to
handle the product safely. They must also include an instruction to always keep the
Operating Manual in the immediate vicinity of the product.
INFO
No unauthorized persons (young children, persons under the influence of medications,
etc.) should be allowed to handle the product.
INFO
Resellers must perform a risk assessment on their product that covers residual hazards.
It must include measures to mitigate risk, or reference the product's Operating Manual.
INFO
Permissible loads and speeds refer to the DMD660. Resellers must take additional loads
(friction, torque loads, deadweight of the table) into account. See page 6.
