DMD660 - OPERATING MANUAL // PAGE 20
8.2 PROCESS
INFO
Contact LOGICDATA for advice on suitable production aids, joining forces and joining
speeds. Failure to perform the process properly may result in damage to the DMD660.
1. Mount the Middle Tube Adapter into the Middle Tube
2. Insert the three Tubes of the Height-Adjustable Column into each other
3. Measure the gliding properties of the Tubes
4. Properly lubricate the Actuator's Nut Insert (Fig. 9) to minimize friction between the Middle
Tube Adapter and the DMD660. Consult LOGICDATA for a list of recommended lubricants
Fig. 9:
Lubricating the Nut Insert
5. Use a suitable production tool (e.g. a hydraulic press) to insert the Actuator into the Height-
Adjustable Column (Fig. 10)
Fig. 10: Inserting the Actuator into a cylindrical Height-Adjustable Column (Thick Tube Down)
8.3 COMPLETING ASSEMBLY
After the Actuator has been mounted into the Middle Tube of the Height-Adjustable Column, proceed to
Chapter 9 for instructions on mounting the Spindle and Motor Ends.
Lubricate here
