DMD660 - OPERATING MANUAL // PAGE 8
liable for any damage that is directly or indirectly caused by the delivery or use of this document. Resellers
must observe the relevant safety standards and guidelines for each product in the Table System.
2.7 RESIDUAL RISKS
Residual risks are the risks that remain after all relevant safety standards have been complied with. These
have been evaluated in the form of a risk assessment. Residual risks associated with assembly and instal-
lation of the DMD660 are listed here and throughout this Operating Manual. The risks associated with the
system as a whole are listed in the System Manual. See also Chapter 1.1 Other Applicable Documents on
page 5. The symbols and signal words used in this Operating Manual are listed in Chapter 2.5 Explanation of
Symbols and Signal Words on page 7.
WARNING Risk of death or serious injury through electric shocks
The DMD660 is an electrical device. Although you will not have to connect the device
to the Power Unit during assembly, basic safety precautions must be taken at all times.
Failure to observe electrical safety precautions may lead to death or serious injury
through electric shocks.
• Never open the DMD660 or its components
• Ensure that the DMD660 is not connected to the Power Unit during assembly
• Do not convert or modify the DMD660 in any way
• Do not immerse the DMD660 or its components in liquid. Clean only with a dry or
slightly damp cloth
• Do not place the Cable of the DMD660 on heated surfaces
• Check the housing and cables of the DMD660 for visible damage. Do not install or
operate damaged products.
WARNING Risk of death or serious injury through electric shocks
The DMD660 is a Protection Class III device. It may only be supplied with safety ex-
tra-low voltage (SELV). Supplying the DMD660 with the incorrect voltage may lead to
death or serious injury through electric shocks.
• Only supply the DMD660 with safety extra-low voltage (SELV)
• Read the product's Type Plate for exact voltage specifications
WARNING Risk of death or serious injury in explosive atmospheres
Operating the DMD660 in potentially explosive atmospheres may lead to death or seri-
ous injury through explosions.
• Read the relevant directives to determine if an atmosphere is potentially explosive
• Do not operate the DMD660 in potentially explosive atmospheres
CAUTION Risk of minor or moderate injury through unexpected movement
Attempting to operate the DMD660 before it is properly mounted may cause unexpect-
ed operation. This may lead to minor or moderate injury.
• Do not operate the DMD660 until it is properly mounted
• Read the DM System Manual for safety advice during operation
