DMD660 - OPERATING MANUAL // PAGE 23
10 ADDITIONAL INFORMATION
10.1 OPERATION
Instructions for operating the system can be found in the DYNAMIC MOTION System Manual.
10.2 SOFTWARE-DEPENDENT FUNCTIONS
A full list of Software-Dependent Functions can be found in the DYNAMIC MOTION System Manual.
10.3 DISASSEMBLY
To disassemble the DMD660, ensure that it has been disconnected from the Power Unit. Then, follow the
assembly instructions in reverse order.
10.4 MAINTENANCE
The DMD660 is maintenance-free for its entire service lifetime.
WARNING Risk of death or serious injury through electric shocks and other hazards
Operating the system using unauthorized spare or accessory parts may lead to death or
serious injury through electric shocks and other hazards.
• Only use accessory parts produced or approved by LOGICDATA
• Only use replacement parts produced or approved by LOGICDATA
• Only allow Skilled Persons to perform repairs or install accessory parts
• Contact customer services immediately if the system malfunctions
The use of unauthorized spare or accessory parts may cause system damage. Warranty
claims are void in this scenario.
10.4.1 REPLACING THE DMD660
Instructions for replacing the DMD660 can be found in the DYNAMIC MOTION System Manual.
10.5 TROUBLESHOOTING
A list of common problems and their solutions can be found in the DYNAMIC MOTION System Manual.
10.6 DISPOSAL
All products in the DM System are subject to the WEEE Directive 2012/19/EU.
• Dispose of all components separately from household waste. Use designated collection
points or disposal companies authorized for this purpose
