LMI chroma+scan 3155, Руководство пользователя

Страница: 47 / 95

47
same subnet (e.g. 192.168.1.9) and then connect a suitable Ethernet cable from the
client machine to the Station.
If you are using multiple Stations, you may need to connect to each Station individually
in order to assign each Station a unique IP address (use the
Set IP command from the
Server menu). It is advisable to leave all Stations but one physically disconnected during
this step.
7.2.2 Connection
After starting FireSync Client, use the lightning (left-most) icon in the toolbar to display
the
Connect... dialog. To connect to a single server, enter the IP address of the server
to which you wish to connect, and then click OK .
To connect to multiple servers simultaneously, click the
Advanced…
button, add the IP
addresses of the servers, and then click OK . You can only connect to multiple servers
after they have all been individually upgraded (see 7.2.3 Server Upgrade).
7.2.3 Server Upgrade
After connecting, the server
will be displayed as “Server S/N 0”. This means that the
Station is new from the factory and has not had the 3x00 software installed on it. The
next step is to upgrade the server.
1. Download the latest Upgrade package for your sensor type (31x0, 32x0, or 33x0)
from http://www.lmi3d.com/support/downloads