background image

1

YUME SWING

This product is designed for shampooing and hair/scalp care.
Please contact the nearest dealer or Takara Belmont directly in case
your operating manual is unreadable due to being soiled or ripped.

Takara Belmont Shampoo Unit

Yume Swing (Reverse Slide Layout Spec.)

Basin Unit

EX-YMSBXYM2 (Yume Basin, Reverse Slide Spec.)

Plumbing Cover

EA-YMSPK2 (Wall mounted plumbing, Reverse Slide Spec.)

EA-YMSPY2 (Under the floor plumbing, Reverse Slide Spec.)

EA-YMSPU2 (Above the floor plumbing, Reverse Slide Spec.)

SWING Arm

EX-YMSAF2 (Front Layout, Reverse Slide Spec.)

EX-YMSAR2 (Rear Layout, Reverse Slide Spec.)

Table of Contents

Description of Warning Symbols
Safety Precautions
Precautions for Use
Position of Warning Labels
Name of Parts
Accessories
Precautions for Basin
Before Using This Product
Precautions for Resin (Plated) Parts
Types of Layout and Standard Positions
Preparation
How to Use
Guiding Clients
Care and Maintenance
Daily Inspections
Before Requesting Repairs
Parts Replaced on a Regular Basis
Standard Duration of Use
Consumable Supplies
Disposing of This Product
After-sales Service
Specifications
Dimensions
Procedures for Daily Inspections

Thank you for purchasing this Takara Belmont product.

The instructions contained in this operating manual should be thoroughly read and understood before use.

Using this product before reading this manual may result in an accident. This product is an industrial shampoo unit designed for hairdressing salons.
Only use this product for its intended purpose and do not use it for non-hairdressing work.
Keep this manual and refer back to them when required.

Version 4

2022.09

2
2
5
8
8
9
9
9

10
11
12
14
17
23
30
30
31
31
31
32
32
32
33
34

Operating Manual

for Reverse Slide Layout

Basin Unit

SWING Arm

Plumbing Cover

(Image is of EX-YMSBXYM2/EX-YMSAR2/EA-YMSPY2) 

Содержание YUME SWING





































Отзывы: