Takara Belmont YUME SWING Скачать руководство пользователя страница 9

Страница: 9 / 36

・

This product employs a ceramic basin. Since bending or deformation cannot be avoided when forming the

basin, please note that the neck position, height, or shape differs slightly from product to product.

Before Using This Product

・

Yume Basin is a wash unit designed for performing back wash

※

1 and hair/scalp care.

・

For more comfortable shampooing, recommend to use ESPOIR stool (Sold separately. Product code: ES-ESST)

with Yume Basin for performing seated shampooing

※

2 and hair/scalp care.

※

Back wash : the user stands behind the basin and performs shampooing from the back (rear position).

※

Seated Shampooing : the user seats on the stool, etc. and performs shampooing from the back

(back position)

・

Check that all accessories have been attached properly.

・

Caster rail is to prevent floor from getting scratched while the caster of basin unit slides. Please note in advance

that surface of caster rail may degrade due to its original feature after continuous use.

・

Please note in advance that the gap of the cover may differ slightly from product to product.

・

There is a gap between basin and cover. This is because the basin is made of ceramic and this is not faulty

product.

・

Please note in advance that the gap between chair backrest and basin when reclining the chair backrest may vary

slightly from product to product.

Accessories

Precautions for Basin

□

Neck Cushion (1)

□

Hair Catcher (1)

□

Head Pillows (1 pair)

□

Drain Cap (1)

□

Sponge (1)

□

Mohair Tape (Spare) (1)

* Confirm that all of the following parts are coming with product

□

Operating Manual (1)

□

Installation Manual (1)

□

“Mohair tape” Manual (1)

□

YUME SPA Technical Manual(except for China)(1)

Содержание YUME SWING





































Результаты поиска

Содержание YUME SWING

Отзывы:

Похожие инструкции для YUME SWING

Бренды по названию

Популярные бренды

Takara Belmont YUME SWING, Руководство по эксплуатации

Результаты поиска

Содержание YUME SWING

Отзывы:

Похожие инструкции для YUME SWING

Бренды по названию

Популярные бренды