manualshive.com logo in svg

Takara Belmont YUME SWING, Руководство по эксплуатации, Страница: 24 / 36

Поделиться
Скачать
Takara Belmont YUME SWING Скачать руководство пользователя страница 24

24

Shower Head Plate 

Foaming Water Outlet

Rubber Gasket

O-ring

Dual function shower head

Main Unit 

Surface to be cleaned 

(front and back)

①

②

Water Discharge Side 

Running Water

Foaming Water Outlet

■

Cleaning the dual function shower head (Foaming Water Outlet)

The foaming water outlet should be rinsed with running 

water in the direction shown in the illustration below:

1

Rotate and detach the shower head plate, remove 

foaming water outlet and rubber gasket.

（

*Do not remove O-ring.

）

2

Clean the shower head plate with water.

Using a nylon or similar brush, remove the dirt such as 

water stain from the holes of shower head plate.

3

Clean the foaming water outlet with water. Clean it 

once a month (measure). Using a nylon or similar 

brush, remove the dirt such as water stain from the 

foaming water outlet.

4

  Re-assemble the shower head.

(1) Insert the foaming water outlet and the rubber 

gasket in the shower head plate in this order.

(2) Attach the shower head plate to the dual function 

shower head main unit. When doing this procedure, 

the water discharge side of the shower head plate 

should face down.

＜

Assembling Procedures

＞

■

Basin

Wipe any dirt clean using detergent diluted with water.

If streaked scratches appear due to contact with metallic 

objects such as watch bands, rub the area with a nylon 

scourer.

Carefully clean around the neck cushion and head cushions 

metal fittings with an item such as a cotton-tipped swab.

Do not use a metallic scourer or sandpaper, as this 

will damage the basin.

Around the

metal fittings

Caution

Содержание YUME SWING





































Отзывы:

Нет отзывов