LMI chroma+scan 3155, Руководство пользователя

Страница: 46 / 95

46
7.1.5 System Upgrade
The station software installation loads only basic firmware so that the station can be
upgraded as a FireSync node. It does not yet contain the necessary firmware to perform
its designated functions in a sensor system. A server upgrade should be performed to
complete the process so that the sensor system is fully usable. This process is
described in the next section.
7.2 FireSync Client (Complete)
FireSync Client is a software application that can be used to set up, upgrade,
demonstrate, or diagnose problems with a scan 3x00 system. The following
sections describe how to use FireSync Client to configure a scan 3x00 system.
7.2.1 Installation
The FireSync Client application is available for Windows XP / Vista / 7, and can be
downloaded from the LMI Technologies support website. To begin, download the
software and install it on a suitable client machine. The client machine should have an
Ethernet adaptor that can be configured for a static IP address and that supports 1000
Mb/s operation.
The user provided Station PC is typically configured with the address 192.168.1.10, but
can be configured as required. Set the client machine to an available address on the