LMI chroma+scan 3155, Руководство пользователя

Страница: 12 / 95

12
2.1.4 Uninterruptible Power Supply (UPS)
To maximize the life of the sensor, LMI Technologies recommends the use of an on-line
double-conversion UPS whenever the quality of the electrical supply to the system is
poor. This includes but is not limited to when the electrical supply:
•
contains high frequency noise (due to other electronics, electric motors or other
factors)
•
is prone to “brown-out” conditions or large voltage fluctuations
•
is prone to electrical surges or spikes due other components or electrical storms.
LMI Technologies recommends the Tripp Lite SU2200RTXL2UA UPS.
2.1.5 Installation Environment
To prevent damage to LMI 3D sensors and ensure reliable operation, avoid installing the
sensor in locations:
•
that are humid, dusty, or poorly ventilated
•
with a high temperature such as a place exposed to direct sunlight
•
where there are flammable or corrosive gases
•
where the unit may be directly subjected to vibration or impact
•
water, oil, or chemicals may splash onto the unit
•
where static electricity is easily generated
2.2 Temperature and Humidity
LMI 3D Sensors are rated for operation between 0- 50°C, and 25-85% Relative Humidity
(non-condensing).
2.3 Maintenance
LMI 3D sensors are high-precision optical instruments. To ensure the highest accuracy
is achieved in all measurements, the windows on the front of the sensor should be kept
clean and clear of debris.
Use dry, clean air to remove dust or other dirt particles. If dirt remains, clean the
windows carefully with a soft, lint-free cloth using an ammonia based cleaner. Ensure
that no residue is left on the windows after cleaning.
2.4 Laser Lifetime
LMI Technologies uses semiconductor lasers in their 3D measurement sensors. To
maximize the lifespan of the sensor it is recommended to turn off the laser by stopping
the sensor whenever it is not in use. Another method for maximizing laser lifetime is to
enable the laser watchdog feature which automatically turns off lasers in a sensor when
there is no conveyor chain movement (see Section 7.2.4.1 for details).