LMI chroma+scan 3155, Руководство пользователя

Страница: 53 / 95

53
7.2.4.2 System Web Tab
The System Web tab, shown below, contains settings that affect the operation of Web
mode. When selected, this tab enables Web mode; the Start , Pause , and Stop buttons
can be used to run the system and outputs will be shown in FireSync Client visualization
tabs.
Note: The system can be run in Web Mode without calibration, but the resulting
measurements will not be accurate.
Data from different Sections can be viewed by selecting the Section’s tab in the display
window.
Profile X Res X-resolution (length axis) of profile data, in mils per pixel.
Profile Y Res Y-resolution (width axis) of profile outputs, in mils per pixel.
Vision X Res X-resolution (length axis) of vision outputs, in mils per pixel.
Vision Y Res Y-resolution (width axis) of vision outputs, in mils per pixel.
Tracheid X Res X-resolution (length axis) of tracheid outputs, in mils per pixel.
Tracheid Y Res Y-resolution (width axis) of tracheid outputs, in mils per pixel.
Obstruction Filter Enable this feature to remove profile data contained within
obstruction regions from web mode output.
Profile Interpolation Determines the method used to resample profile points along
the x-axis: Nearest Neighbor, or Linear Interpolation.