LMI chroma+scan 3155, Руководство пользователя

Страница: 74 / 95

74
UseVisionIntensity Enables (1) or Disables (0) the use of the
VisionIntensity settings (defined below).
VisionIntensityR Specifies the desired red intensity level for the
calibration target (1 - 255).
VisionIntensityG Specifies the desired green intensity level for the
calibration target (1 - 255).
VisionIntensityB Specifies the desired blue intensity level for the
calibration target (1 - 255).
XAdjustment Offset applied to the x-coordinates of all data
(profile, vision, tracheid) in Web or Detection mode.
This setting is used for x-alignment between multiple
servers, and is written by FireSync Client at the end
of calibration.
YAdjustment Offset applied to the y-coordinates of all data
(profile, vision, tracheid) in Web or Detection mode.
This setting is used for y-alignment between multiple
servers, and is written by FireSync Client at the end
of calibration.
UseObstructions Enable this field to manually remove regions from
the calibration input data. These regions are
specified via sensor obstructions (see Section
7.2.7.2) and typically represent conveyor hardware
regions. When this field is disabled, the calibration
will automatically detect conveyor hardware regions
to remove from the input data.
Capture These elements determine the behaviour of the
system when capturing data for diagnostic analysis
by LMI Technologies. To use the system normally,
please ensure that data capture is disabled by
setting Capture/Enabled to
0 .
Members This element lists the groups that are defined for this
system.
Group-level settings include the following entries:
Setting Description
Name
“Top” or “Bottom”
Sections This element contains a list of Section elements
(described below). Sections are used to define
Detection mode outputs that can be routed to separate
destinations.
Members This element lists the individual sensors that are
contained in this group.
Each section in a group’s section list contains the following entries:
Setting Description
Id A user-defined identifier for this section. When using the
FireSync Client application, this field determines the user
interface tab in which a section will be displayed.