manualshive.com logo in svg

LM-Dental LM-ProPower CombiLED, Руководство пользователя

Поделиться
Скачать
LM-Dental LM-ProPower CombiLED Скачать руководство пользователя страница 3

 

3

CONTENTS

1. Introduction.............................................................................................................................................. 5
2.  Safety instructions .................................................................................................................................. 6

2.1.  Safety notices  ................................................................................................................................ 6
2.2.  Electro magnetic compatibility  ..................................................................................................... 7
2.3.  Safety considerations to install, servicing and to repair the CombiLED unit .............................. 7
2.4.  Intended and prohibited use  ........................................................................................................ 7
2.5.  Declaration of conformity .............................................................................................................. 7
2.6.  EMC Guidance and manufacturer’s declaration ........................................................................... 8

3.  Content of delivery ................................................................................................................................ 11

3.1.  Content of unit.............................................................................................................................. 11
3.2.  General description ...................................................................................................................... 11
3.3.  CombiLED unit ............................................................................................................................. 12
3.4.  Coupling and type plate............................................................................................................... 13
3.5.  Control panel ................................................................................................................................ 13
3.6.  Medicament bottle (optional)....................................................................................................... 14
3.7.  AirLED Polisher ............................................................................................................................ 14
3.8.  Foot Control unit .......................................................................................................................... 15
3.9.  Symbols on the equipment .......................................................................................................... 16

4.  Taking CombiLED in to use .................................................................................................................. 17

4.1.  How to install the unit. ................................................................................................................. 17
4.2.  How to connect the unit to the air supply ................................................................................... 18
4.3.  How to connect the unit for tap water (optional)  ....................................................................... 18
4.4.  How to connect the unit to the supply current ........................................................................... 19

5.  Operating instructions UltraLED Scaler .............................................................................................. 20

5.1.  How to install UltraLED Scaler to use  ........................................................................................ 20
5.2.  Foot control functions for Scaler ................................................................................................. 22
5.3.  Power and working modes for Scaler  ........................................................................................ 22
5.4.  How to operate with the UltraLED Scaler  .................................................................................. 23
5.5.  After Scaler treatment .................................................................................................................. 24

6.  Operating instructions AirLED Polisher  ............................................................................................. 25

6.1.  How to install AirLED Polisher to use ......................................................................................... 25
6.2.  Foot control functions for Polisher .............................................................................................. 27
6.3.  Power and working modes for Polisher ...................................................................................... 27
6.4.  Air purge quick cleaning function  .............................................................................................. 27
6.5.  How to operate with AirLED Polisher .......................................................................................... 28

6.5.1. Polishing for supragingival use  ......................................................................................... 29
6.5.2. Polishing for subgingival use ............................................................................................. 29

6.6.  After Polisher treatment ............................................................................................................... 29

7.  Cleaning and maintenance ................................................................................................................... 30

7.1.  Air purge quick cleaning function ............................................................................................... 30
7.2.  Automatic cleaning function for the scaler and polisher ........................................................... 30
7.3.  How to clean the equipment and the components .................................................................... 31
7.4.  Recommended cleaning procedure ............................................................................................ 32
7.5. Maintenance ................................................................................................................................. 34

8.  Troubleshooting CombiLED ................................................................................................................. 35
9.  Technical data ........................................................................................................................................ 39

Содержание LM-ProPower CombiLED













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды