Livescribe™ Smartpen User Guide
27
Renaming Your Smartpen in Livescribe™ Desktop
effectively mimic your ears - when you play a binaural recording back, it sounds like you are actually in
the location where you recorded.
Once you record audio, you can play back the binaural effect using stereo earphones. You can also
play back the binaural effect as a regular stereo recording over any type of headphones or speakers.
The 3-D Recording Headset included with each Pulse smartpen has a custom jack. This is required for
binaural recordings. However, if you want to use a 3.5mm stereo headset just for playback, connect
your 3.5mm headset to your smartpen using a standard 2.5mm to 3.5mm adaptor.
If you own an Echo™ smartpen, you can use any standard 3.5mm stereo headset for playback. For
binaural recording, you need to use a Livescribe 3.5mm 3-D Recording Premium Headset. You can
purchase this separately from the Livescribe Online Store.
N
OTE
:
You can record binaural audio with the earbuds in your ears or around your neck as shown below.
Make sure the “L” earbud is in your left ear and the “R” earbud is in your right ear.
N
OTE
:
Keep the earbuds about 6-8 inches apart to mimic the position of your ears.
Renaming Your Smartpen in Livescribe™ Desktop
Your smartpen has a default name. You can rename your Livescribe smartpen to identify it from other
smartpens in Livescribe™ Desktop.
To rename your smartpen:
1.
Install and Launch Livescribe™ Desktop. (See the
Livescribe™ Desktop User Guide
for details).
2.
Dock the smartpen to be renamed.
3.
If it is not already selected, use the smartpen selector drop down to choose the smartpen you want
to rename.
4.
Choose
Tools
>
Smartpen
>
Rename
. At the prompt, type the smartpen name and click
OK
.
