Livescribe™ Smartpen User Guide
127
Paper Replay™ Password
Quick Launch (jump to an application and quickly launch it)
Double-tap on the center of the Nav Plus control. Then start writing the first few letters of the
application name, continuing until you see the name appear on the display. Tap the right arrow of your
Nav Plus to launch the application. You can later tap on what you wrote to re-launch the application.
Launch Line
Similar to Quick Launch, you can use Launch Line to quickly launch any Open Paper application
installed on your smartpen. Open Paper applications are applications that do not require pre-printed
paper controls to function.
1.
Draw a horizontal line on your notebook (starting from right or left) and without removing your
smartpen tip from the page, immediately double back on the line ending close to where you started.
2.
Immediately write the name of the target application above the line.
3.
To launch the application, tap on the application name you have written. You can later tap on what
you wrote to re-launch the application.
You can use the Launch Line tap-around feature to navigate the application. You can tap just above,
below, left, or right of the application name to perform corresponding functions of the Nav Plus.
Paper Replay™ Password
Keep your recorded Paper Replay™ sessions private. To set up Paper Replay Password protection:
1.
Power on your smartpen.
2.
Go to the Main Menu by tapping the center of the Nav Plus at the bottom of your Livescribe Dot
Paper.
3.
Tap down to Paper Replay.
4.
Tap down to Password protection to set your 4-digit password.
5.
Write a 4-digit password on your dot paper notebook. You can disguise your password by using any
of the following methods:
•
Write the numbers in a different order (for example, backwards).
•
Write the numbers in various places on the same page.
•
After writing and confirming your password, go back and write other numbers over your
password to disguise it.
