LION INTOXILYZER 8000, Руководство оператора

Страница: 14 / 57

O
REGON
S
TATE
P
OLICE
I
MPLIED
C
ONSENT
P
ROGRAM
I
NTOXILYZER
®
8000 O
PERATOR
’
S
G
UIDE
2.0 S
TEP
O
NE
– P
REPARING TO
C
ONDUCT A
T
EST
Originally Adopted: 07/13/2006
Revision #: 1.1
Revision Effective Date: 09/08/2006
completed by alerting the operator with an audible tone. The instrument will then proceed to the
“Review Data (Y/N)?” message (see page 13).
Entering Driver’s License Data Manually
From the “Scan Subject License or Press Enter” message, the operator may chose to enter license
information manually by pressing the “Enter” key on the instrument’s keyboard. An operator may
choose to do this in the event that the subject is unlicensed, has lost or misplaced their license, or in
the event that the bar code printed on the license is unreadable by the instrument’s bar code scanner.
The instrument will acknowledge the operator’s selection to manually enter license information by
proceeding to the
“Enter Subject Name (Last, First, M)” message.
Enter Subject Name
(Last, First, M)
The operator should type the name of the subject just as it is to be printed on the final Completed Test
Report. As the operator enters information on the keyboard, the information will be displayed on the
second line of the instrument’s display. Generally, name information is entered in a uniform format
similar to that used by the LEDS (Law Enforcement Data System) reporting system (last name, first
name, middle name or initial), however,
the subject name field is not required and no data need be
entered for the instrument to proceed through the testing sequence . In some instances, the LEDS
format may not be appropriate and the operator may choose to deviate from this format. Information
entered into the instrument will be printed on the Test Report in WYSIWYG (What You See Is What
You Get) format. The operator must confirm the information entered by pressing the “Enter” key on
the instrument’s keyboard. The instrument will then proceed to the
“Enter Subject DOB
(MM/DD/YYYY)” message.
Enter Subject DOB
(MM/DD/YYYY)
The operator should type the Date of Birth (DOB) of the driver in mm/dd/yyyy format and confirm the
information by pressing the “Enter” key on the instrument’s keyboard. As the operator enters
information on the keyboard, the information will be displayed on the second line of the instrument’s
display.
The subject DOB field is a required field, however, if the DOB is unknown, it need not be
correct for the instrument to proceed through the testing sequence. A false DOB can be used (e.g.,
“01/01/1901”
.
ALL PRINTED COPIES ARE UNCONTROLLED AND MAY NOT BE COMPLETE Page 12 of 54