LION INTOXILYZER 8000, Руководство оператора

Страница: 16 / 57

O
REGON
S
TATE
P
OLICE
I
MPLIED
C
ONSENT
P
ROGRAM
I
NTOXILYZER
®
8000 O
PERATOR
’
S
G
UIDE
2.0 S
TEP
O
NE
– P
REPARING TO
C
ONDUCT A
T
EST
Originally Adopted: 07/13/2006
Revision #: 1.1
Revision Effective Date: 09/08/2006
The operator may choose “Y” to review the subject information data entered into the instrument or
press “N” to proceed to the testing sequence. The operator must confirm the selection by pressing
the “Enter” key on the instrument’s keyboard. If “Y” is selected, the instrument will separately display
the Subject Name, Subject DOB, Subject ID #, and State of Issue. The operator can not edit the
operator permit information, but may edit the subject information if necessary. After displaying each
entry, the operator must accept the information by pressing the “Enter” key on the instrument’s
keyboard.
Aborting a Test Sequence
During the testing sequence, an operator may choose to abort the test sequence by selecting one of
two alternative methods: a) by pressing the “Start Test” button at any time during the test sequence
other than during the breath sampling period(s); or b) by pressing the “A” key on the instrument
keyboard.
NOTE
It is suggested that operators use the instrument keyboard to abort the testing sequence. If an
operator mistakenly uses the “Start Test” button to abort a test sequence while the instrument is in the
breath sampling period (i.e.,
“Please Blow” phase), the instrument will record a “Refused” test
sequence rather than a “Sequence Aborted” test.
ALL PRINTED COPIES ARE UNCONTROLLED AND MAY NOT BE COMPLETE Page 14 of 54