Page 74 / 107
Section 10. Programmers reference
Explanation:
Factory default settings reloaded for crosspoint and I/O card configurations
and emulated EDIDs.
Info:
The response may contain additional messages as the transmitter makes the
configurations. These responses can be omitted.
Info:
After resetting the needed parameters, the device restarts. In case of USB connection
reconnecting is always necessary.
Warning!
Reloading GENERAL factory defaults AFFECTS the serial operation mode and the
RS-232 baud rate options as well. The default operation mode is the PASS mode and the
default baud rate is 57600 baud in the UMX-OPT-TX150R. If the previous serial settings
differ from the default ones, please set up the necessary values after reboot with protocol
commands. (Set the RS-232 operation mode command in section
10.4.5
on page
74
and
the Change RS-232 baud rate command in section
10.4.2
on page
73
.)
10.4.5. Set the RS-232 operation mode
Description
: This command sets the RS-232 port operation mode.
Format
Example
Command {RS232=<mode>}
→ {rs232=control}
Response (RS232=<mode>)CrLf
← (RS232=CONTROL)CrLf
Legend:
<mode>
Two kinds of operation modes can be:
<CONTROL>
The CPU in the transmitter can receive
commands and send responses.
<PASS>
The serial connectors on the transmitter
and on the receiver are linked together.
Explanation:
The device can be controlled via RS-232 port.
10.4.6. Query the RS-232 operation mode
Description
: This command queries the current RS-232 operation mode.
Format
Example
Command {RS232=?}
→ {rs232=?}
Response (RS232=<mode>)CrLf
← (RS232=CONTROL)CrLf
Legend:
Please read section
10.4.5
on page
74
.
Explanation:
The device can be controlled via RS-232 port.
10.4.7. Clear HDCP key cache
Description
: The device stores the HDCP keys from the connected devices. These
cached keys can be cleared with this command.
Format
Example
Command {:HDCPRESET}
→ {:hdcpreset}
Response (Done)CrLf
← (Done)CrLf
Explanation:
HDCP key cache is cleared.
Info:
This function is useful when too many keys were cached and a connected source device
cannot accept so many keys.
Содержание UMX-OPT-TX150R
Страница 1: ...UMX OPT TX150R User s Manual ...
Страница 2: ......
