Page 76 / 107
Section 10. Programmers reference
<code>:
short name for type of log entry
<param>:
technical parameter
<occ>:
occurrence number for this type of log entry
Explanation:
There are no errors only standard notices that occur on boot up.
Info:
The error list can contain NOTICEs and WARNINGs under normal operation. These
entries do not mean that there is any problem with the matrix!
10.4.11. Configure remote alerts
Description
: The device logs different levels of errors. Configure which level of errors
has to be sent out as an alarm message.
Format
Example
Command
{ELEVELSEND#<p>=
<0>,<1>,<2>,<3>,<4>}
→ {ELEVELSEND#1=0,0,1,1,1}
Response (ELEVELSEND#<p>=
<0>,<1>,<2>,<3>,<4>)CrLf
← (ELEVELSEND#1=0,0,1,1,1)CrLf
Explanation:
The device will send an immediate message on all control interfaces when
a ‘matter’, ‘error’ or ‘fatal’ level error occurs.
Legend:
<p>: Adjusted control interface must be 1 = RS-232
<0>:
‘Notice’ level events
0 = no immediate message send
1 = immediate message
<1>:
‘Warning’ level events
0 = no immediate message send
1 = immediate message
<2>:
‘Matter’ level events
0 = no immediate message send
1 = immediate message
<3>:
‘Error’ level events
0 = no immediate message send
1 = immediate message
<4>:
‘Fatal’ level events
0 = no immediate message send
1 = immediate message
10.4.12. Query level of remote alerts
Description
: User can check which level of errors has to be sent out as an alarm
message.
Format
Example
Command {ELEVELSEND#<p>=?}
→ {ELEVELSEND#1=?}
Response (ELEVELSEND#<p>=
<0>,<1>,<2>,<3>,<4>)CrLf
← (ELEVELSEND#1=0,0,1,1,1)CrLf
Legend:
Please read section
10.4.11
on page
76
.
Explanation:
The device will send an immediate message on all control interfaces when
a ‘matter’, ‘error’ or ‘fatal’ level error occurs.
10.4.13. Set the video priority settings
Description
: This command sets the video priority order of the Autoselect mode.
Format
Example
Command {VIDEOPRIORITY=<vpmode>}
→ {videopriority=4}
Response (VIDEOPRIORITY=<vpmode>)CrLf
← (VIDEOPRIORITY=4)CrLf
Legend:
<vpmode> Three kinds of video priority modes can be:
<0>
First detect (factory default)
First the device check the DVI-D than VGA than the
HDMI video input port. That port will be selected
which contains valid video signal.
Содержание UMX-OPT-TX150R
Страница 1: ...UMX OPT TX150R User s Manual ...
Страница 2: ......
