Page 58 / 107
Section 9. Software control
– Using the Lightware Matrix Controller
9.3.3. Input parameter settings
By clicking on the video inputs a dialog window appears showing the parameters for the
active input.
Figure 9-5. Input parameters for digital video signal
General settings
HDCP enable
The HDCP capability can be enabled or disabled on the input port with using the HDCP
enable checkbox. This can prevent unnecessary HDCP encryption with certain source
devices. Note that only unprotected content can be played on the source if this setting is
disabled. For more information about HDCP handling see section
2.7
on page
13
.
No sync color
The port generates a solid 640x480 resolution image when there is no incoming signal
and the No Sync enable check box is marked. The color of this picture can be set here.
Double click on the colored field, a new window will appear. Choose the desired color
then click the ‘OK’ button to apply changes. Click the Cancel button to discard changes
and close the window.
No sync enable
If the No Sync enable check box is marked the port generates a solid 640x480 resolution
image when there is no incoming signal. If the check box is unmarked and there is no
incoming signal the device does not give the video signal and the hotplug on the output.
Info:
Audio transmission is available with video transmission only. If the No sync picture is
disabled the audio transmission is available with valid incoming video signal only.
Input port status
Connection status of the selected input port is shown here. (Type of the video signal,
HDCP encryption, the source 5V, sync type)
Info:
These fields are filled automatically by the device after the examination of the signal.
Содержание UMX-OPT-TX150R
Страница 1: ...UMX OPT TX150R User s Manual ...
Страница 2: ......
