Page 10 / 107
Section 2. General description
Bi-directional RS-232 pass-through
–
AV systems can contain serial port controllers
and controlled devices. Serial port pass-through supports any unit that
works with standard RS-232.
Universal power adaptor
– UMX-OPT-TX150R transmitter is equipped with a
universal +5V DC power adaptor, which accepts AC voltages from
100 to 240 Volts with 50 or 60 Hz line frequency.
Locking DC connector
– Special plug of wall adaptor ensures safe power supply.
This type of connector prevents unwanted extractions.
HDCP compliant
–
UMX-OPT-TX150R complies with HDCP standard. Lightware is a
legal HDCP adopter. Both HDCP encrypted and non-HDCP
components can be installed in the same system. The included
advanced
HDCP
management
eliminates
the
need
for
re-authentication upon switching.
20 meters input cable compensation
–
Using 22AWG high quality DVI or HDMI
cable, the digital inputs are automatically compensated for up to
20 meters cable length at 24bpp, which extends installation
possibilities even at the highest HDTV or computer resolutions.
Pixel Accurate Reclocking
–
(removes jitter caused by long cables) The output has a
clean, jitter free signal, eliminating signal instability and distortion
caused by long cables or connector reflections.
Frame detector and signal analysis
–
Using the Lightware Matrix Controller
software the exact video and audio signal format can be determined
such as timing, frequencies, scan mode, HDCP encryption, color
range, color space and audio sample rate.
Deep Color support and conversion
–
It is possible to transmit the highest quality
36-bit video streams for perfect color reproduction.
DVI/HDMI conversion
–
The transmitter is able to convert from HDMI to DVI signals
so that you can watch HDMI videos on your computer display without
audio.
Zero frame delay
– Even on Analog Inputs -
Lightware’s UMX-OPT-TX150R add no
frame noticeable delay to the switched signal. There is no frame or
line period delays to the signals when passing a Lightware device.
Separate Audio and Video switching
–
Video and audio signals are separated and
can be switched independently. Even if the HDMI stream contains
embedded audio.
Analog Audio and Video A/D conversion
–
UMX-OPT-TX150R converts
uncompressed analog audio and video signal to digital and places it to
the output.
Rack mounting options
– Several mounting methods ensure universal usage. Units
can be placed into standard racks or under flat surfaces.
Input (video & audio) status LEDs
–
Front panel LEDs give feedback about state of
the unit and the video and audio signals.
Accepts analog and digital audio signals -
Accepts analog stereo; 5.1 S/PDIF and
even 7.1 HDMI embedded audio signals. Analog signals are
converted to digital formats and digital or digitized analog audio can
be embedded in the video stream.
Autoswitch function for video and audio inputs
–
Autoselect mode with or without
priority can toggles between inputs. It helps the handling of the
transmitter and installation of new devices.
Содержание UMX-OPT-TX150R
Страница 1: ...UMX OPT TX150R User s Manual ...
Страница 2: ......
