UMX-OPT-TX150R
User’s Manual
Section 10. Programmers reference
Page 91 / 107
10.8.13. Query the no sync picture properties
Description
: This command reads the enabling status and the RGB color code of the no
sync picture on the active input port.
Format
Example
Command {:SETBG#<in>@<S/A>I=?}
→ {:SETBG#1@SI=?}
Response (SETBG#1@SI=
<RED>;<GREEN>;<BLUE>;1)CrLf
← (SETBG#1@SI=255;255;0;1)CrLf
Legend:
Please read section
10.8.12
on page
90
.
Explanation:
The no sync picture is enabled and its color is the (255, 255, 0) RGB coded
yellow on the DVI-D input port.
Info:
Querying of the color of no sync picture is available only on the selected active input.
10.8.14. Query timings of the incoming signal
Description
: This command reads out the properties of the incoming signal on the
selected input ports.
Format
Example
Command {:GETTIMINGS#<in>@<S/A>=?}
→ {:GETTIMINGS#1@SI=?}
Response (GETTIMINGS#<in>@<S/A>=
<TLW>;
<LW>;
<HFP>;
<HW>;
<HBP>;
<TH>;
<H>;
<VFP>;
<VW>;
<VBP>;
<TMDS>;
<BPP>;)CrLf
← (GETTIMINGS#1@SI=
2200;
1920;
89;
44;
147;
1125;
1080;
4;
5;
36;
148352;
24;)CrLf
Legend:
<S/A>:
Affected ports:
S = single selected input
A = all inputs
<TLW>:
Total Line Width
<LW>:
Line Width
<HFP>:
Hsync Front Porch
<HW>:
Hsync Width
<HBP>
Hsync Back Porch
<TH>
Total Height
<H>
Height
<VFP>
Vsync Front Porch
<VW>
Vsync Width
<VBP>
Vsync Back Porch
<TMDS>
TMDS clock in kHz
<BPP>
Bit/Pixel
Содержание UMX-OPT-TX150R
Страница 1: ...UMX OPT TX150R User s Manual ...
Страница 2: ......
