Page 56 / 107
Section 9. Software control
– Using the Lightware Matrix Controller
Step 3.
The Find dialog appears automatically
If the connection has been made via
serial port
, the device type and serial number can
be inquired by double clicking the appropriate port, or it can be highlighted with a single
click.
If the connection has been made via
USB port
, the device type and the serial number are
displayed automatically. Click the desired device, to highlight it.
Info:
Lightware Matrix Controller software can only connect to the extender if it is in control
mode. If the UMX-OPT-TX150R is in pass-through mode, the software cannot
communicate with it and cannot list it as an available device.
If you want to connect to the extender which
is in pass-through mode click on the desired
com port with the right mouse button, then
choose the “Set RS-232 to CONTROL
mode” option. The software sets the
extender to CONTROL mode. Now the device can be listed with double left click on the
discover window.
Figure 9-2.
Figure 9-3.
Serial connection
USB connection
Step 4.
Click on the Connect button to connect to the device
Info:
If the device is not listed, try searching again, or reconnect the device and restart the
application.
When the Lightware Matrix Controller finds the hardware, it determines the product type,
and the control menu appears. The current state of the crosspoint switch is displayed.
Info:
The controller software can communicate only with Lightware protocol.
Info:
For RS-232 connection the transmitter has to be set to 9600 or 57600 baud rate. The
controller software determines the baud rate automatically.
Содержание UMX-OPT-TX150R
Страница 1: ...UMX OPT TX150R User s Manual ...
Страница 2: ......