5. Software Control – Lightware Device Controller
MMX8x4-HT series – User's Manual
60
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
6.5.3.
HDMI and TPS Output Port Properties
DIFFERENCE:
MMX8x8-HDMI-4K-A and MMX8x8-HDMI-4K-A-USB20 models have no TPS port.
TPS Output Port Properties Window
Available Settings
#
#
hdcp
#lock
#unlock
#mute
#unmute
#portstatus
#tpsmode
#diagnostic #framedetector #autoselect #nosyncscreen #testpattern
▪
Port name
▪
Mute/unmute
the port;
▪
Lock/unlock
the port;
▪
Autoselect settings
(Enabled / Disabled, Mode and Priorities) See more details about this feature in
section.
Pay attention for the following settings for the proper operation of Autoselect function:
–
Set the Autoselect settings to
Enabled
;
–
Be sure that no input is set to the same priority number;
–
Be sure that all priority values are filled in (no empty space);
–
Be sure that all inputs are enabled with the green checkbox on the right side;
–
Always click on the
Set priorities
button after the changes to launch the new settings.
▪
Signal type
(Auto / DVI / HDMI);
▪
HDCP mode
(Auto / Always): The matrix forces the source sent the signal without encryption if the
content allows when
Auto mode
is selected.
▪
PWR5V mode
(Auto / Always on / Always off): The setting lets the source and the sink devices be
connected – independently from the transmitted signal;
▪
Audio mode (only in
O2
and
O4
ports of MMX8x8-HDMI-4K-A model);
▪
TPS mode*
(Auto / HDBaseT / Longreach / LPPF1 / LPPF2 ). See more details about this setting in
section.
▪
PoE setting*
(enable / disable): The matrix is able to supply (send remote power) devices through the
TPS input and output ports which are compatible with the PoE standard.
▪
Cable Diagnostics
(in TPS port)*; For more details see
section.
*TPS related settings can be found only in TPS output properties window.
Analog audio settings
#analogaudio #balance #volume
The displayed configurable settings depends on the chosen audio mode. For more details see
Input Settings #analogaudio #balance #volume
section.
No sync screen
C
onfiguration settings of the test pattern. See more details in the
Test Pattern Generator - No Sync Screen
section.
Status and Signal Info
#portstatus
It gives a feedback about the current parameters the of the video signal:
▪
Monitor Present / Signal present / Signal type / HDCP / Hotplug detect
▪
Resolution / Scan / Color depth / Color space
