7. LW2 Programmers’ Reference
MMX8x4-HT series – User's Manual
91
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
7.4.5.
Lock the Output
Locking an output port. Output’s state cannot be changed until unlocking.
Command and Response
{#>
<out>
•
<layer>
}
(1LO
<out2>
•
<layer>
)CrLf
Example
{#>01 A}
(1LO01 A)
7.4.6.
Unlock the Output
Unlocking an output port. The connection on output can be changed.
Command and Response
{+<
<out>
•
<layer>
}
(0LO
<out2>
•
<layer>
)CrLf
Example
{+<01 V}
(0LO01 V)
O1 video output port is unlocked.
INFO:
The device issues the above response regardless of the previous state of the output (either it was
locked or unlocked).
7.4.7.
View Connection State on the Output
Viewing the output’s connection results in different response length, because it depends on the device. The
response below refers to an MMX8x4-HT420M.
Command and Response
#crosspoint
#switch
{VC•
<layer>
}
(ALL
<layer>
•
<O01>
•
<O02>
)CrLf
Parameters
O01 shows the corresponding output’s connection state.
Identifier
Parameter description
Parameter values
<layer>
Signal type of the layer
A:
audio layer
V:
video layer
AV:
audio & video layer
State letters
Letter
State
Example
L
Output is locked
L01
M
Output is muted
M01
U
Output is locked and muted
U01
Example
{VC AV}
(ALLV M01 01)
(ALLA 01 01)
I2 video input port is connected to the video output port and I5 audio input port is connected to the audio
output port. AV is not used in the response. When AV is typed in the commands, the response will result two
lines, one for the Video and one for the Audio port states.
7.4.8.
View Crosspoint Size
Shows the physical crosspoint size.
Command and Response
{getsize•
<layer>
}
(SIZE=
<size>
•
<layer>
)CrLf
Parameters
Identifier
Parameter description
Parameter values
<size>
Crosspoint size
<number_of_inputs>
x
<number_of _outputs>
<layer>
Signal type of the layer
See the previous section
Example
{GETSIZE }
(SIZE=8x5)
INFO: In MMX8x4-HT400MC and MMX8x4-HT420M models five outputs means four video and one
independent analog audio outputs).
