Lightware MMX8x4-HT Series, Руководство пользователя

Страница: 16 / 163

2. Product Overview MMX8x4-HT series – User's Manual 16
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
2.2. Rear View
MMX8x4-HT400MC
MMX8x4-HT420M
Rear View Legend
1
Infra output ports 3.5 mm Jack plugs for infra signal transmission (all of them are outputs).
2
Serial/Infra
output ports
2-pole Phoenix connectors (2x) for IR output or TTL output serial signal.
3
48 V LED On This LED lights, when phantom power is turned on.
Off The phantom power is turned off.
4
RS-232 port 3-pole Phoenix connectors (2x) for bi-directional RS-232 communication. Local
control functions (e.g. Lightware Device Controller software) and message sending
are also possible via RS-232 port. See more details in RS-232 Connector section.
5
Reset button Reboots the matrix; the same as switching it off and on again.
6
Control Ethernet
port
RJ45 connector to control the matrix via LAN.
See more details in Control Ethernet Port section.
Made in EU, Hungary
TPS IN 1 TPS IN 2 TPS IN 3 TPS IN 4
TPS LINK
50/60 Hz 1.4-0.85A
100-240 VAC
Sn:
3
4
IIR R O OU UTT
2 1
TX TX
4
RS232
2 1 3
HDMI OUT 3 HDMI OUT 4
HDMI HDMI IN 6 IN 5 HDMI IN 7 HDMI IN 8
AUDIO OUT
AUDIO IN
L R
L R
48V
Reset
RX TX RX TX Control
ETHERNET
Boot
HDMI OUT 1 HDMI OUT 2
MIC IN
t
e
o
5 6 7
9
8
w
4
3 2
1
Made in EU, Hungary
50/60 Hz 1.4-0.85A
100-240 VAC
Sn:
Reset
3
4
RX TX RX TX
2 1
TX TX
4 RS232
2 1 3
MIC IN
AUDIO OUT
AUDIO IN
L R
6 5
I I R R O O U U T T
t r e
w
q
4 2 5 6 7
8
u i y o
9
1 3
7
Bootload button Hidden button for bootload mode (keep pressed the boot button and turn on the
matrix to take it bootload mode).
8
Advanced audio
input ports
3- pole Phoenix connector for microphone input and 5-pole Phoenix connector for
balanced analog audio input. See details about the audio features in Audio Interface
section.
9
Advanced audio
output port
5-pole Phoenix connector for balanced analog audio; the signal can be the
embedded audio from the TPS or HDMI inputs or from the microphone input or
from the line in. See details about the audio features in Audio Interface section.
q
Audio inputs/
outputs
5-pole Phoenix connector for balanced analog audio; depending on the
configuration, it can be input or output. Output audio is the de-embedded HDMI
signal from the nearby HDMI port. See details about the audio features in
Audio Interface section.
w
HDMI inputs HDMI input ports for sources.
e
TPS inputs RJ45 connectors for incoming TPS signal.
▪
MMX8x4-HT400MC and model is not PoE-compliant.
▪
MMX8x4-HT420M model is PoE-compliant.
r
TPS Ethernet Locking RJ45 connector to supply Ethernet communication for the TPS lines – it can
be separated from the LAN communication (controlling functions) of the matrix. Not
PoE-compliant. Pin assignment can be found in Ethernet Link to TPS Input/Output
Ports section.
t
AC connector Local power in; standard IEC connector accepting 100-240 V, 50 or 60 Hz.
y
TPS Outputs RJ45 connectors for TPS signal; PoE-compliant.
u
GPIO 8-pole Phoenix connector for configurable general purpose input/output ports.
Pin assignment can be found in the GPIO - General Purpose Input/Output Ports.
i
Relay 8-pole Phoenix connector for relay ports. Pin assignment can be found in the
Relay Connector section.
o
HDMI outputs HDMI output connectors for sinks.
  
