Lexmark Optra N 4040, Справочное руководство, Страница: 97 / 259

5-4
Laser Printer Reference Handbook
40
39-
1XX
37 Insufficient
Memory Not enough memory for function requested. To
verify that the printer recognizes all the installed
memory, go to “Print Tests” on page 5-18 and print
the test page. Make sure the memory shown on the
printout matches the installed memory.
38 Memory Full Memory used to store pages is full. To verify that the
printer recognizes all the installed memory, go to
“Print Tests” on page 5-18 and print the test page.
Make sure the memory shown on the printout
matches the installed memory.
39 Complex Page Page too complex to print. To verify that the printer
recognizes all the installed memory, go to “Print
Tests” on page 5-18 the user menus and print the
“Print Menus” test page. Make sure the memory
shown on the printout matches the installed
memory.
43 Font Card Not
Supported Font card format not supported by printer.
44 Defective Font
Card Defective font card installed in font slot.
47 Font Card
Removed While
Printing Printer needs data on removed card.
52 Flash Full Not enough flash memory for data requested to be
stored.
53 Unformatted or
Defective Flash Flash problem at POR or while attempting to write.
54 Serial Error Framing or parity error on serial.
58 Duplex Not
Attached Duplex is no longer connected, and printer top cover
is closed.
59 Duplex Cover
Open Top cover of duplex unit is sensed open.
62 Disk Full Not enough disk space for data that has been
requested to be written to disk.
63 Unformatted or
defective Disk The printer will ignore a disk it senses as defective.
Run the Quick Disk Test. If the test fails, the disk is
defective or the data on track1 is bad. If the Quick
Disk Test passes but the disk does not work, run the
Disk Test/Clean (2 hr. test). Replace the disk as
instructed by the operator panel.
Error Message Table (Continued)
Error/Code Action