Lexmark Optra N 4040, Справочное руководство, Страница: 204 / 259

4049-XXX
8-7
4
049-
XXX
928 Erase Lamps Erase lamp assembly missing or
disconnected.
931 Printhead Error No first hsync. Refer to the Printhead
section in the Service Manual.
932 Printhead Error Lost hsync. Refer to the Printhead section
in the Service Manual.
934 Printhead Error Lost lock condition. Refer to the Printhead
section in the Service Manual.
935 Printhead Error Mirror motor unable to reach operating
speed. Refer to the Printhead section in
the Service Manual.
941 ROM SIMM ROM SIMM failed CRC; code data or font
data. Run the diagnostic Memory Test for
ROM. Replace the SIMM if the test fails or
the problem recurs after POR; replace the
RIP Board if the SIMM does not fix the
problem.
944 RIP Board RIP processor failure. Replace the RIP
Board.
945 RIP Board ASIC 1 failure. Replace the RIP Board.
946 RIP Board ASIC 2 failure. Replace the RIP Board.
947 Engine Board Engine ASIC RAM failure. Replace the
engine board.
948 Engine Board Engine ASIC electronics failure. Replace
the engine board.
950 RIP Board SRAM failure. Replace the RIP Board.
951 Engine Board PQET SRAM failed verification test.
Replace the engine board.
952 Engine Board Unable to zero PQET SRAM. Replace the
engine board.
953 Engine Board NVRAM failure. Replace the engine
board.
954 Engine Board Printhead crystal not functioning correctly.
Replace the engine board.
960 Memory Error Bad or missing DRAM in the base DRAM
slot. Reseat the DRAM and run the
diagnostic Memory Test for DRAM. POR
the printer. If the test fails or the problem
recurs, replace the DRAM SIMM.
Error Code Message Table (Continued)
Error Code Explanation