Lexmark Optra N 4040, Справочное руководство, Страница: 223 / 259

8-26
Laser Printer Reference Handbook
4
049-
XXX
Print Test 2
Print Test 2 generates two printouts: a page similar to the test page, and
a fine dot pattern which can be used to evaluate banding or other print
quality problems.
Print Test 2 will duplex if the duplex option is installed.
This test prints from the user-selected default paper source if the default
source is a tray, or from Tray 1 if the default source is a feeder. You can
change the default source by selecting Paper Source in the Paper
Menu. After running the test, reset the default source to the customer’s
selection.
To run Print Test 2:
1. Enter Diagnostics mode.
2. Select [PRINT TESTS].
3. Select [Print Test 2].
4. Select [Single] or [Continuous].
5. Select [Cancel] to stop continuous print.
6. Press Return to return to the Diagnostic mode main menu.
Print Test 3
This test generates 2 printouts: a solid black page, and a dot pattern
that can be used to evaluate print quality. Print Test 3 will not duplex.
This test prints from the user-selected default paper source if the default
source is a tray, or from Tray 1 if the default source is a feeder. You can
change the default source by selecting Paper Source in the Paper
Menu. After running the test, reset the default source to the customer’s
selection.
1. Enter Diagnostics mode.
2. Select [PRINT TESTS].
3. Select [Print Test 3].
4. Select [Single] or [Continuous].
5. Select [Cancel] to stop continuous print.
6. Press Return to return to the Diagnostics mode main menu.