Lexmark Optra N 4040, Справочное руководство, Страница: 150 / 259

4040
6-23
4040
Permanent Page Count
The permanent page count can be only displayed. It cannot be modified
or reset by the customer or servicer.
1. Enter Diagnostics mode.
2. Select [PAGE COUNTS].
3. Select [Permanent Page Count].
4. Press Return to return to the Diagnostics mode main menu.
Print Test 1
Print Test 1 generates one printout similar to the test page. This test
uses paper from tray 1 only.
To run Print Test 1:
1. Enter Diagnostics mode.
2. Select [PRINT TESTS].
3. Select [Print Test 1].
4. Select [Single] or [Continuous].
5. Select [CANCEL] to stop continuous print.
6. Press Return to return to the main Diagnostics mode main menu.
Print Test 2
Print Test 2 generates two printouts: a page similar to the test page, and
a fine dot pattern with two black 1 inch squares which can be used to
evaluate banding or other print quality problems. If you have a duplex
option installed, the two printouts print on one piece of paper.
To run Print Test 2:
1. Enter Diagnostics mode.
2. Select [PRINT TESTS].
3. Select [Print Test 2].
4. Select [Single] or [Continuous].
5. Select [Cancel] to stop continuous print.
6. Press Return to return to the main Diagnostic main menu.