Lexmark Optra N 4040, Справочное руководство, Страница: 77 / 259

4-4
Laser Printer Reference Handbook
4
037 /
4047
-0
5
E
[Error 943 System
Board] NVRAM is bad and the system board must be
replaced. This Error Code can be overridden to
allow the operator to use the machine
temporarily. Refer to the section on Storage in
your Service Manual.
[Error 950 System
Board] Defective ASIC. Replace the system board.
[Error 951 System
Board] Basecode Checksum Error. Replace the system
board.
[Error 952 System
Board] DRAM failure. Replace the system board.
[Error 960 Memory] Optional DRAM failure. Replace the memory
option. If the problem remains, replace the
system board.
[Error 980] Replace Code Modules if installed.
[Paper Jam] Refer to the Paper Jam Service Check in the
Service Manual.
[Load Tray1] Be sure paper is loaded in the tray. Refer to the
Tray 1 Service Check in the Service Manual.
[Load Tray2] Be sure paper is loaded in the tray. Refer to the
Tray 2 Service Check in the Service Manual.
[Load Manual] Refer to the Manual Feed Service Check in the
Service Manual.
[Change Size] The paper is too short for the data to print on the
page. Paper size must be defined.
[Paper In Manual Too
Soon] Paper, or envelope, was inserted in the manual
feed slot before the previous page printed.
[Top Cover Open] Close the top cover. If the error remains, refer to
the Cover Interlock Service Check in the Service
Manual.
[Print Cartridge
Missing] Install the Print Cartridge. If the error remains,
refer to the Transfer Roll Service Check in the
Service Manual.
Error Message Table (Continued)
Error Code/Message Action