Lexmark Optra N 4040, Справочное руководство, Страница: 201 / 259

8-4
Laser Printer Reference Handbook
4
049-
XXX
32 Wrong Print Cartridge
installed The installed print cartridge is not
supported by the Optra printer.
37 Insufficient Collation Memory Memory is too full to collate the print job.
38 Memory Full Memory used to store pages is full. To
verify that the printer recognizes all the
installed memory, go to the user menus
and print the “Print Menus” test page.
Make sure the memory shown on the
printout matches the installed memory.
39 Complex Page Page too complex to print.To verify that
the printer recognizes all the installed
memory, go to the user menus and print
the “Print Menus” test page. Make sure
the memory shown on the printout
matches the installed memory.
43 Font Card Not Supported Font card format not supported by printer.
44 Defective Font Card Defective font card installed in font slot.
47 Font Card Removed While
Printing Printer needs data on removed card.
51 Defective Flash The printer detects a defective Flash
SIMM. If the error recurs replace the
Flash SIMM.
52 Flash Full Not enough flash memory for data
requested to be stored.
53 Unformatted Flash Flash problem at POR or while attempting
to write.
54 Serial Error Framing or parity error on serial.
56 Serial Port Disabled or,
Parallel Port Disabled Data has been sent to a port which has
been disabled in the Setup Menu. The
port can be reactivated by entering the
customer setup menu and selecting Serial
Setup or Parallel Setup, Serial Buffer or
Parallel Buffer, and changing the setting
from Disabled to Auto.
57 Check Duplex Connection The duplex unit has been electrically
disconnected from the printer but the
printer top cover is not open. Check the
auto-connect plugs on the duplex unit and
the printer.
Error Code Message Table (Continued)
Error Code Explanation