Replace roller kit [81.xx]
1
Replace the roller kit. For more information, see the instruction sheet that came with the part.
2
Press
to clear the message and continue printing.
Replace unsupported cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the
User’s
Guide
.
Note:
If you do not have a replacement cartridge, then see the “Ordering supplies” section of the
User’s Guide
or
visit
www.lexmark.com
.
Replace unsupported fuser [32.xy]
Remove the fuser, and then install a supported one. For more information, see the instruction sheet that came with
the part.
Replace unsupported imaging unit [32.xy]
Remove the imaging unit, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the
User’s
Guide
.
Note:
If you do not have a replacement imaging unit, then see the “Ordering supplies” section of the
User’s Guide
or
visit
www.lexmark.com
.
Replace wiper
1
Replace the fuser wiper. For more information, see the instruction sheet that came with the part.
2
Press
to clear the message and continue printing.
Restore held jobs?
Do either of the following:
•
Select
Restore
on the printer control panel to restore all held jobs stored in the printer hard disk.
•
Select
Do not restore
if you do not want any print jobs to be restored.
Serial port [x] disabled [56]
Try one or more of the following:
•
From the printer control panel, select
Continue
to clear the message.
The printer discards any data received through the specified serial port.
•
Select
Reset active bin
to reset the active bin for a linked set of bins.
Troubleshooting
193
