Lexmark M5163dn Скачать руководство пользователя страница 182

Страница: 182 / 253

Disk full [62]

Try one or more of the following:

•

From the printer control panel, press

to clear the message and continue printing.

•

Delete fonts, macros, and other data stored in the printer hard disk.

•

Install a printer hard disk with larger capacity.

Disk must be formatted for use in this device

From the printer control panel, select

Format disk

to format the printer hard disk and clear the message.

Note:

Formatting deletes all the files stored in the printer hard disk.

Disk near full. Securely clearing disk space.

Try one or more of the following:

•

From the printer control panel, press

to clear the message.

•

Delete fonts, macros, and other data stored in the printer hard disk.

•

Install a printer hard disk with higher capacity.

Empty the hole punch box

Empty the hole punch box.

For more information, see the “Cleaning the printer” section of the

User’s Guide

Reinsert the hole punch box into the finisher, and then press

on the printer control panel to clear the message.

Error reading USB drive. Remove USB.

An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.

Error reading USB hub. Remove hub.

An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.

Imaging unit low [84.xy]

You may need to order an imaging unit. If necessary, press

on the printer control panel to clear the message and

continue printing.

Imaging unit nearly low [84.xy]

If necessary, press

on the printer control panel to clear the message and continue printing.

Troubleshooting

182

Содержание M5163dn






























































































































































































































































Результаты поиска

Содержание M5163dn

Отзывы:

Похожие инструкции для M5163dn

Бренды по названию

Популярные бренды

Lexmark M5163dn, Руководство пользователя

Результаты поиска

Содержание M5163dn

Отзывы:

Похожие инструкции для M5163dn

Бренды по названию

Популярные бренды