The staple, hole punch finisher must not be combined with any other output options.
In a configuration with two or more optional finishers:
•
The staple finisher must always be on top.
•
The high
‑
capacity output expander must always be at the bottom.
•
The output expander is the only option that can be placed on top of the high
‑
capacity output expander.
•
The output expander and mailbox may be installed in any order.
When using optional trays:
•
Always use a caster base when the printer is configured with a 2100
‑
sheet tray.
•
The 2100
‑
sheet tray must always be at the bottom of a configuration.
•
A maximum of four optional trays may be configured with the printer.
•
The optional 250
‑
and 550
‑
sheet trays may be installed in any order.
Using the printer control panel
1
2
3
4
5
6
7
8
9
10
Use the
To
1
Display
•
View the printer status.
•
Set up and operate the printer.
2
Select button
Submit changes made in the printer settings.
3
Arrow buttons
Scroll up and down or left and right.
4
Keypad
Enter numbers, letters, or symbols.
5
Sleep button
Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep mode:
•
Press any hard button.
•
Pull out Tray 1 or load paper in the multipurpose feeder.
•
Open a door or cover.
•
Send a print job from the computer.
•
Perform a power
‑
on reset with the main power switch.
•
Attach a device to the USB port on the printer.
6
Stop or Cancel button Stop all printer activity.
Learning about the printer
11
