Lexmark M1242 Скачать руководство пользователя страница 70

Страница: 70 / 140

Align the printer with the optional tray, and then lower the printer until it

clicks

into place.

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Turn on the printer.

Moving the printer

Moving the printer to another location

CAUTION—POTENTIAL INJURY:

If the printer weight is greater than 18 kg (40 lb), then it requires two or

more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY:

When moving the printer, follow these guidelines to avoid personal

injury or printer damage:

•

Make sure that all doors and trays are closed.

•

Turn off the printer, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer.

•

If the printer has separate ﬂoor-standing optional trays or output options attached to it, then disconnect
them before moving the printer.

Maintaining the printer

Содержание M1242













































































































































Результаты поиска

Содержание M1242

Отзывы:

Похожие инструкции для M1242

Бренды по названию

Популярные бренды

Lexmark M1242, Руководство пользователя

Результаты поиска

Содержание M1242

Отзывы:

Похожие инструкции для M1242

Бренды по названию

Популярные бренды