Lexmark M1242 Скачать руководство пользователя страница 123

Страница: 123 / 140

Unpack the optional tray, and then remove all packing material.

Note:

If optional trays are already installed, then unlock them from the printer before lifting the printer. Do

not try to lift the printer and trays at the same time.

Align the printer with the optional tray, and then lower the printer until it

clicks

into place.

CAUTION—POTENTIAL INJURY:

If the printer weight is greater than 18 kg (40 lb), then it requires

two or more trained personnel to lift it safely.

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Turn on the printer.

Add the tray in the print driver to make it available for print jobs. For more information, see

“Adding available

options in the print driver” on page 124

Software

Installing the printer software

Obtain a copy of the software installer package.

•

From the software CD that came with your printer.

•

Go to

http://support.lexmark.com

, and then select your printer and operating system.

Run the installer, and then follow the instructions on the computer screen.

Upgrading and migrating

123

Содержание M1242













































































































































Результаты поиска

Содержание M1242

Отзывы:

Похожие инструкции для M1242

Бренды по названию

Популярные бренды

Lexmark M1242, Руководство пользователя

Результаты поиска

Содержание M1242

Отзывы:

Похожие инструкции для M1242

Бренды по названию

Популярные бренды