Lexmark M1242 Скачать руководство пользователя страница 132 | Manualshive

Страница: 132 / 140

background image

Federal Communications Commission (FCC) compliance information

statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than
recommended cables or by unauthorized changes or modiﬁcations to this equipment. Unauthorized changes
or modiﬁcations could void the user's authority to operate this equipment.

Note:

To assure compliance with FCC regulations on electromagnetic interference for a Class B computing

device, use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach
or 1021294 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a
violation of FCC regulations.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
Telephone: (859) 232–3000
E-mail: [email protected]

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux
équipements pouvant causer des interférences NMB-003.

Notices

132

«
...
130
131
132
133
134
...
»

Содержание M1242













































































































































Отзывы:

Нет отзывов

Похожие инструкции для M1242

Бренд: LabelTac Страницы: 2

Бренд: YOUPAI Страницы: 15

Бренд: TallyGenicom Страницы: 15

Бренд: Dascom Страницы: 12

Бренд: Dascom Страницы: 19

Бренд: Dascom Страницы: 5

Бренд: Panduit Страницы: 74

Бренд: Tally Страницы: 2

Бренд: Tally Dascom Страницы: 57

Бренд: Fenix Страницы: 65

Бренд: Xerox Страницы: 89

Бренд: TallyGenicom Страницы: 2

Бренд: Oki Страницы: 2

Бренд: Kyocera Mita Страницы: 209

Бренд: Xerox Страницы: 2

5550N - Phaser B/W Laser Printer

Бренд: Xerox Страницы: 16

Бренд: iDPRT Страницы: 41

Бренд: Ricoh Страницы: 849

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды