manualshive.com logo in svg

Lexmark C9235, Руководство пользователя

Принтер Lexmark C9235 - мощное устройство для профессиональной печати с высоким качеством изображения. Чтобы ознакомиться с инструкциями по использованию, скачайте бесплатное руководство пользователя с сайта manualshive.com. Настройте принтер правильно и получайте отличные результаты печати!

Поделиться
Скачать
background image

Federal Communications Commission (FCC) compliance information

statement

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

The FCC Class A limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.

The manufacturer is not responsible for any radio or television interference caused by using other than
recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes
or modifications could void the user's authority to operate this equipment.

Note: 

To assure compliance with FCC regulations on electromagnetic interference for a Class A computing

device, use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach
or 1021294 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a
violation of FCC regulations.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
Telephone: (859) 232–2000
E-mail: [email protected]

Industry Canada compliance statement

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux
équipements pouvant causer des interférences NMB-003.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2014/30/EU, 2014/35/EU,
and 2011/65/EU on the approximation and harmonization of the laws of the Member States relating to
electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, and
on the restrictions of use of certain hazardous substances in electrical and electronic equipment.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY,
40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön
fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the

Notices

237

Содержание C9235























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для C9235

DataCard CP60 Quick Install Manual preview
CP60
Бренд: DataCard Страницы: 8
IBM 5218 Setup Procedures preview
5218
Бренд: IBM Страницы: 60
FujiFilm Apeos 5580 Reference Manual preview
Apeos 5580
Бренд: FujiFilm Страницы: 37
Kyocera 5003i Operation Manual preview
5003i
Бренд: Kyocera Страницы: 708
Konica Minolta bizhub C227 Installation Manual preview
bizhub C227
Бренд: Konica Minolta Страницы: 12
Output Technology EuroLine Series Operator'S Manual preview
EuroLine Series
Бренд: Output Technology Страницы: 73
Olivetti PG L2555 Service Manual preview
PG L2555
Бренд: Olivetti Страницы: 293
SPRT SP-POS88V User Manual preview
SP-POS88V
Бренд: SPRT Страницы: 18
Konica Minolta nizhub c250p User Manual preview
nizhub c250p
Бренд: Konica Minolta Страницы: 108
Xante Accel-a-Writer 4 Maintenance And Specifications preview
Accel-a-Writer 4
Бренд: Xante Страницы: 12
Ocom OCPP-M03 Instruction Manual preview
OCPP-M03
Бренд: Ocom Страницы: 23
NEC PC-8000 Series User Manual preview
PC-8000 Series
Бренд: NEC Страницы: 90
Epson T027201 Product Information Sheet preview
T027201
Бренд: Epson Страницы: 4
Epson T033220 Product Information Sheet preview
T033220
Бренд: Epson Страницы: 4
Epson T033120 Product Information Sheet preview
T033120
Бренд: Epson Страницы: 4
Epson T034620 Material Safety Data Sheet preview
T034620
Бренд: Epson Страницы: 4
Epson T033320 Product Information Sheet preview
T033320
Бренд: Epson Страницы: 4
Epson T034220 Material Safety Data Sheet preview
T034220
Бренд: Epson Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды