Solving server and printer problems
One or more servers cannot be set online
Try one or more of the following:
•
Make sure a license is installed for each server during installation. For more information about activating licenses,
see “Activating Lexmark Intelligent Capture licenses” on page 22. For more information about adding licenses after
installation, see “Adding an MFP, e
‑
forms virtual printer, or software client license to an existing server” on page
71.
•
Check your proxy, firewall, and other network settings across the Lexmark Intelligent Capture system to make sure
communication is allowed among components.
•
Uninstall and reinstall the problem server making sure to enter correct addresses for the database and load balancer.
Note that when the server is installed on the same computer as the database and the load balancer, the fully
qualified domain name of the computer must still be used, not localhost or the loopback address (
127.0.0.1
).
•
Make sure the correct address is used for the database when installing the load balancer. Note that when the load
balancer is installed on the same computer as the database, the fully qualified domain name of the computer must
still be used, not localhost or the loopback address (
127.0.0.1
). If the address is specified incorrectly, then
uninstall and reinstall the load balancer and all servers.
Note:
Multiple non
‑
communicating servers may impact system performance. If you do not expect a
non
‑
communicating server to quickly reestablish communication, then you should remove it. To remove a server
that is not communicating, select the check box beside it in the table, and then click
Remove Server(s)
.
One or more servers cannot be set offline
From the Windows Services control panel, make sure the Lexmark Solutions Apache Agent service is running.
Error in importing a license
Try one or more of the following:
•
Make sure the correct address is used for the database and load balancer when installing servers. Note that when
the server is installed on the same computer as the database and the load balancer, the fully qualified domain name
of the computer must still be used, not localhost or the loopback address (
127.0.0.1
). If the address is specified
incorrectly, then uninstall and reinstall the applicable servers.
•
Make sure the correct address is used for the database when installing the load balancer. Note that when the load
balancer is installed on the same computer as the database, the fully qualified domain name of the computer must
still be used, not localhost or the loopback address (
127.0.0.1
). If the address is specified incorrectly, then
uninstall and reinstall the load balancer and all servers.
Troubleshooting
130