Lexmark 634dte - X B/W Laser, Руководство администратора

Страница: 115 / 148

Installing client software on a Microsoft Cluster Server
Note: For more information on the latest Lexmark Intelligent Capture port monitor support, see the Readme file.
1
Set any online Print Spooler resource offline to avoid initiating a failover during installation.
2
Install only the Lexmark Document Server Printer Port on each physical node in the cluster.
3
Run Windows Update on each node to make sure the latest updates for the .NET framework are installed.
4
If necessary, configure the spooler resource and the Lexmark Intelligent Capture Client Service for the cluster.
Note: Make sure the spooler resource and the Lexmark Intelligent Capture Client Service are in the same cluster
resource pool so that failover is initiated together.
5
Create print queues on the cluster, selecting Lexmark Document Server Port
‑
Enterprise as the port.
Note: For more information on creating print queues, see “Configuring a Lexmark Document Server port in
Windows 7, Windows Vista, Windows Server 2008, or Windows Server 2008 R2” on page 117.
Adding Lexmark Intelligent Capture printers on a client
workstation or print server
After installing the client software, you must create a separate Lexmark Document Server Printer Port for each profile
you want to use on a Lexmark Intelligent Capture server, and you must create a print queue assigned to that port.
1
Make sure you have installed the print driver that will be used with the Lexmark Document Server Printer Port.
Note: If you do not have a specific print driver that you plan to use with the Lexmark Document Server Printer
port, then you can use the PCL or PostScript Lexmark Universal Driver appropriate for your operating system,
available at
http://support.lexmark.com .
2
Make sure at least one server is online using the System Status task from the System tab in LMC.
3
Using the Printers or Devices control panel in Windows, add a new printer.
Note: For more information on adding a new printer, see “Configuring a Lexmark Document Server port in
Windows 7, Windows Vista, Windows Server 2008, or Windows Server 2008 R2” on page 117.
4
When prompted, select a local printer and do not allow Windows to search for plug
‑
and
‑
play printers.
5
When prompted to select a printer port, create a new port of Lexmark Document Server Port
‑
Enterprise type.
6
Type a name for the new port, and then click Next . The port name must be 75 characters or fewer.
7
Select a Lexmark Document Server.
If the client software is newly installed, then the list is empty.
Do the following to add a new server:
a
Click Manage List .
b
From the Server Setup dialog, click Add .
c
Type the fully qualified domain name or IP address of the load balancer, and then click OK .
d
Click OK to exit the Server Setup dialog.
e
Select the new server from the list.
8
Click Next .
Managing software clients 115