The profile launches the associated script on the server. Documents are scanned as necessary, and any prompts
included in the script are presented to the user.
Note:
When using a solution that reads a bar code, scan at 300 dpi for best results. Depending on the documents
being scanned, using a higher setting for Darkness may also provide better results.
Using Lexmark Intelligent Capture print queues
1
With a document open in Windows, click
File
>
.
2
Select the printer associated with the Lexmark Document Server port and the profile you want to use.
3
To configure print options, click
Properties
,
Preferences
,
Options
, or
Setup
.
See the documentation that came with the printer or print driver for more information about print options.
Note:
When using a solution that reads a bar code, print at 300 dpi, with the any other quality settings at the
highest levels for best results.
4
Click
OK
to close any printer software dialogs.
5
Click
OK
or
.
The document is sent to the Lexmark Intelligent Capture system using the profile specified in the configuration of
the Lexmark Document Server port associated with the selected printer. The file type is determined by the output
of the print driver, and each solution determines the accepted file types.
Using Select'N'Send
Using the Select'N'Send GUI
The GUI version of Select 'N' Send is useful for providing users access to a selection of Lexmark Intelligent Capture
profiles and allowing users to submit a variety of documents and document types to the Lexmark Intelligent Capture
system. Selected files are submitted to the system in their current formats. Each solution script determines which file
types are acceptable. For more information, contact the developer of your solution.
1
Launch the Select'N'Send GUI:
Testing and using Intelligent Capture solutions
120
