Leuze BPS 300i Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 94

background image

Device description

Leuze electronic GmbH + Co. KG

BPS 307i

11

• Optional model with display

• Optional model with heating for use to -35 °C

3.1.3

Accessories

Special accessories are available for the bar code positioning system. The accessories are optimally
matched to the BPS:

• Highly flexible, scratch-, smudge- and UV-resistant bar code tape

• Mounting devices for precise mounting with one screw (easy-mount)

• Modular connection technology via connection hoods with M12 connectors, spring-cage terminals or

with cable

3.1.4

Device model with heating

The bar code positioning system is optionally available as a model with integrated heating. In this case,
heating is permanently installed ex works.

NOTICE

No self-installation of the heating!

Ä

Self-installation of the heating on-site by the user is not possible.

The heating consists of two parts:

• Front cover heater

• Housing heater

Features of the integrated heating:

• Extends the application range of the BPS to -35 °C

• Supply voltage 18 … 30 V DC

• BPS release through an internal temperature switch (start-up delay of about 30 min for 24 V DC and

minimum ambient temperature of ‑35 °C)

• Required conductor cross-section for the power supply: At least 0.75 mm

2

NOTICE

Do not use ready-made cables!

Ä

It is not possible to use ready-made cables.
The current consumption of the BPS is too high for the ready-made cables.

Function

When the supply voltage is applied to the BPS, a temperature switch initially only supplies the heating with
current (front cover heater and housing heater). During the heating phase (around 30 min), when the inside
temperature rises above 15 °C, the temperature switch connects the BPS to the supply voltage. This is fol-
lowed by the self test and the changeover to read operation. The PWR LED lights up, showing overall
readiness for operation.

When the inside temperature reaches approx. 18 °C, another temperature switch turns the housing heater
off and, if necessary, back on again (if the inside temperature drops below 15 °C). This does not interrupt
the read operation.

The front cover heater remains activated until an inside temperature of 25 °C is reached. At temperatures
above this, the front cover heater switches off and, with a switching hysteresis of 3 °C, back on again at an
inside temperature below 22 °C.

«
...
9
10
11
12
13
...
»

Содержание BPS 300i































































































Отзывы:

Нет отзывов

Похожие инструкции для BPS 300i

Бренд: Farfisa Страницы: 14

Бренд: Valmet Страницы: 63

Бренд: 2B Technologies Страницы: 4

Бренд: dbx Страницы: 2

Бренд: DAVIS Страницы: 12

Бренд: FCI Страницы: 44

Бренд: FCI Страницы: 36

Бренд: FCI Страницы: 26

Бренд: Yamaha Страницы: 10

Бренд: Yamaha Страницы: 38

Бренд: Yamaha Страницы: 45

Бренд: Barksdale Страницы: 2

Бренд: KALEAS Страницы: 64

Бренд: Anritsu Страницы: 29

Бренд: VWR Страницы: 44

Бренд: Ntron Страницы: 29

Бренд: NIEUWKOOP Страницы: 2

Бренд: BGS technic Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды