Lenovo ThinkSystem SR650 V2 Скачать руководство пользователя страница 190

Страница: 190 / 212

Severity: Error

User Action:

1. Restart the system and retry the operation again.

2. If the problem persists, contact technical support.

•

FQXPMER0003I: RAID configuration cleared successfully

Severity: Info

User Action:

Information only; no action is required.

•

FQXPMER0003M: Failed to erase internal storage drives

Severity: Error

User Action:

1. Ensure the proper connection of hard drives, backplane, and related cables.

2. Check if security function is enabled for the hard disk drives, if yes, disable that and retry the

operation.

3. Ensure device firmware is at the latest level.

4. Restart the system and retry the operation again.

5. If the problem persists, contact technical support.

•

FQXPMER0004I: Internal storage drives erased successfully

Severity: Info

User Action:

Information only; no action is required.

•

FQXPMER0004M: Failed to clear system logs

Severity: Error

User Action:

1. Restart BMC via supported method and reboot the system.

2. Retry this operation again.

3. If the problem persists, contact technical support.

•

FQXPMER0005I: All system logs cleared successfully

Severity: Info

User Action:

Information only; no action is required.

•

FQXPMER0005M: Failed to load UEFI factory default settings

Severity: Error

User Action:

1. Restart BMC via supported method and reboot the system.

2. Retry this operation again.

186

ThinkSystem SR650 V2 Messages and Codes Reference

Содержание ThinkSystem SR650 V2





















































































































































































































Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды

Lenovo ThinkSystem SR650 V2, Справочник

Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды