Lenovo ThinkSystem SR650 V2 Скачать руководство пользователя страница 176

Страница: 176 / 212

1. Remove any newly added TPM card from the planar or re-install the original TPM card that shipped

with the system.

2. Reboot the system.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU4054G: TPM card logical binding has failed.

Severity: Warning

User Action:

Complete the following steps:

1. Reboot the system.

2. If the problem persists, collect Service Data logs.

3. Contact Lenovo Support.

•

FQXSFPU4056M: TPM card is changed, need install back the original TPM card which shipped with

the system.

Severity: Error

User Action:

Complete the following steps:

1. Re-install the original TPM card that shipped with the system.

2. Reboot the system.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU4057I: Secure boot variable is being accessed with an unauthorized password, reset the

system immediately to recover.

Severity: Warning

User Action:

Information only; no action is required.

•

FQXSFPU4058I: Secure Boot Setting is changed from enabled to disabled

Severity: Warning

User Action:

Information only; no action is required.

•

FQXSFPU4059I: User requested to skip freezing lock of AHCI-attached SATA drives. System UEFI

accepted the request and will execute priot to OS boot.

Severity: Info

User Action:

Complete the following steps:

1. Change SystemOobCustom.SkipAhciFreezeLock from Disable to Enable using OneCLI tool.

2. Reboot the system into OS.

•

FQXSFPU4060I: Skipped freezing lock of AHCI-attached SATA drives.

Severity: Info

172

ThinkSystem SR650 V2 Messages and Codes Reference

Содержание ThinkSystem SR650 V2





















































































































































































































Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды

Lenovo ThinkSystem SR650 V2, Справочник

Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды