Lenovo ThinkSystem SR650 V2 Скачать руководство пользователя страница 89

Страница: 89 / 212

Information only; no action is required.

•

FQXSPPU2007I: The System [ComputerSystemElementName] has detected a POST Error

deassertion.

This message is for the use case when an implementation has detected that Post Error has deasserted.

Severity: Info
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - CPU
SNMP Trap ID: 40
CIM Prefix: PLAT CIM ID: 0185

User Action:

Information only; no action is required.

•

FQXSPPW0001I: [PowerSupplyElementName] has been added to container

[PhysicalPackageElementName].

This message is for the use case when an implementation has detected a Power Supply has been added.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0084

User Action:

Information only; no action is required.

•

FQXSPPW0002L: [PowerSupplyElementName] has Failed.

This message is for the use case when an implementation has detected a Power Supply has failed.

Severity: Error
Serviceable: Yes
Automatically notify Support: Yes
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0086

User Action:

Complete the following steps until the problem is solved:

1. Check the PSU LED:

a. If AC LED is not lit, check the power cord and input voltage.

b. If DC LED is not lit or fault LED is lit, remove and then reinstall the power supply.

2. If the problem persists, collect service data log from the XCC WebGUI and contact Lenovo Support.

•

FQXSPPW0003G: Failure predicted on [PowerSupplyElementName].

This message is for the use case when an implementation has detected a Power Supply failure is
predicted.

Severity: Warning
Serviceable: Yes
Automatically notify Support: No

Chapter 2

XClarity Controller events

Содержание ThinkSystem SR650 V2





















































































































































































































Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды

Lenovo ThinkSystem SR650 V2, Справочник

Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды