Lenovo ThinkSystem SR650 V2 Скачать руководство пользователя страница 90

Страница: 90 / 212

Alert Category: Warning - Power
SNMP Trap ID: 164
CIM Prefix: PLAT CIM ID: 0088

User Action:

Collect service data log from the XCC WebGUI and SMM service log (if applicable), and contact Lenovo
Support.

•

FQXSPPW0005I: [PowerSupplyElementName] is operating in an Input State that is out of range.

This message is for the use case when an implementation has detected a Power Supply that has input out
of range.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0098

User Action:

Information only; no action is required.

•

FQXSPPW0006I: [PowerSupplyElementName] has lost input.

This message is for the use case when an implementation has detected a Power Supply that has input
that has been lost.

Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0100

User Action:

Complete the following steps until the problem is solved:

1. Check the PSU LED:

a. If AC LED is not lit, check the power cord and input voltage.

b. If DC LED is not lit, remove and then reinstall the power supply.

2. If the problem persists, collect service data log from the XCC WebGUI and contact Lenovo Support.

•

FQXSPPW0007I: Power supply [arg1] in the enclosure/chassis (MTM-SN: [arg2])has lost input.

This message is for the use case when an implementation has detected a Power Supply that has input
that has been lost.

Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Power
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0100

User Action:

Information only; no action is required.

ThinkSystem SR650 V2 Messages and Codes Reference

Содержание ThinkSystem SR650 V2





















































































































































































































Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды

Lenovo ThinkSystem SR650 V2, Справочник

Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды