Lenovo ThinkSystem SR650 V2 Скачать руководство пользователя страница 170

Страница: 170 / 212

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any mismatch

found.

2. Check the Lenovo support site for an applicable service bulletin or firmware update that applies to

this processor error.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0016N: A processor within the system has failed the BIST.

Severity: Error

User Action:

Complete the following steps:

1. If the processor or firmware was just updated, check the Lenovo support site for an applicable

service bulletin or firmware update that applies to this processor error.

2. If the problem persists, collect Service Data logs.

3. Contact Lenovo Support.

•

FQXSFPU0017G: A processor microcode update failed.

Severity: Error

User Action:

Complete the following steps:

1. Check Lenovo support site for an applicable service bulletin or firmware update that applies to this

Processor error.

2. If the problem persists, collect Service Data logs.

3. Contact Lenovo Support.

•

FQXSFPU0018N: CATERR(IERR) has asserted on processor [arg1].

Severity: Error

User Action:

Complete the following steps:

1. Check Lenovo support site for an applicable service bulletin or UEFI firmware update that applies to

this Processor error.

2. Reboot the system.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0019N: An uncorrectable error has been detected on processor [arg1].

Severity: Error

User Action:

Complete the following steps:

1. Check Lenovo support site for an applicable service bulletin or UEFI firmware update that applies to

this error.

2. Reboot the system.

3. If the problem persists, collect Service Data logs.

166

ThinkSystem SR650 V2 Messages and Codes Reference

Содержание ThinkSystem SR650 V2





















































































































































































































Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды

Lenovo ThinkSystem SR650 V2, Справочник

Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды