Lenovo ThinkSystem SR650 V2 Скачать руководство пользователя страница 55

Страница: 55 / 212

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0140

User Action:

Information only; no action is required.

•

FQXSPMA0010J: [PhysicalMemoryElementName] on Subsystem [MemoryElementName]

Throttled.

This message is for the use case when an implementation has detected Memory has been Throttled.

Severity: Warning
Serviceable: Yes
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: PLAT CIM ID: 0142

User Action:

Complete the following steps until the problem is solved:

1. Check the XCC event log for any fan or cooling related issues and address them first.

2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are

correctly installed in place and keep clean.

3. Make sure that the room temperature meets operating specifications.

4. Upgrade all system firmware and chassis firmware (if applicable) to the latest level.

Note:

If the device is part of a cluster solution, verify that the latest level of code is supported by the

cluster solution before the update.

5. If the problem persists, collect service data log from the XCC WebGUI and contact Lenovo Support.

•

FQXSPMA0012M: An Over-Temperature Condition has been detected on the

[PhysicalMemoryElementName] on Subsystem [MemoryElementName].

This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Detected.

Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Temperature
SNMP Trap ID: 0
CIM Prefix: PLAT CIM ID: 0146

User Action:

Complete the following steps until the problem is solved:

1. Check the XCC event log for any fan or cooling related issues and address them first.

2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are

correctly installed in place and keep clean.

3. Make sure that the room temperature meets operating specifications.

4. Make sure that the DIMMs and drive baffles (if applicable) are installed in place.

Chapter 2

XClarity Controller events

Содержание ThinkSystem SR650 V2





















































































































































































































Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды

Lenovo ThinkSystem SR650 V2, Справочник

Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды