Lenovo ThinkSystem SR650 V2 Скачать руководство пользователя страница 169

Страница: 169 / 212

User Action:

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any mismatch

found.

2. Check the Lenovo support site for an applicable service bulletin or firmware update that applies to

this processor error.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0012K: A cache associativity mismatch has been detected for one or more processors.

Severity: Error

User Action:

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any mismatch

found.

2. Check the Lenovo support site for an applicable service bulletin or firmware update that applies to

this processor error.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0013K: A processor model mismatch has been detected for one or more processors.

Severity: Error

User Action:

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any mismatch

found.

2. Check the Lenovo support site for an applicable service bulletin or firmware update that applies to

this processor error.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0014N: A processor family mismatch has been detected for one or more processors.

Severity: Error

User Action:

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any mismatch

found.

2. Check the Lenovo support site for an applicable service bulletin or firmware update that applies to

this processor error.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0015K: A processor stepping mismatch has been detected for one or more processors.

Severity: Error

User Action:

Chapter 3

UEFI events

165

Содержание ThinkSystem SR650 V2





















































































































































































































Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды

Lenovo ThinkSystem SR650 V2, Справочник

Результаты поиска

Содержание ThinkSystem SR650 V2

Отзывы:

Похожие инструкции для ThinkSystem SR650 V2

Бренды по названию

Популярные бренды